Optical-Fiber Microsphere-Based Temperature Sensors with ZnO ALD Coating—Comparative Study - Université de Montpellier Accéder directement au contenu
Article Dans Une Revue Sensors Année : 2021

Optical-Fiber Microsphere-Based Temperature Sensors with ZnO ALD Coating—Comparative Study

Résumé

This study presents the microsphere-based fiber-optic sensor with the ZnO Atomic Layer Deposition coating thickness of 100 nm and 200 nm for temperature measurements. Metrological properties of the sensor were investigated over the temperature range from 100 °C to 300 °C, with a 10 °C step. The interferometric signal was used to monitor the integrity of the microsphere and its attachment to the connecting fiber. For the sensor with a 100 nm coating, a spectrum shift of the reflected signal and the optical power of the reflected signal were used to measure temperature, while only the optical power of the reflected signal was used in the sensor with a 200 nm coating. The R2 coefficient of the discussed sensors indicates a linear fit of over 0.99 to the obtained data. The sensitivity of the sensors, investigated in this study, equals 103.5 nW/°C and 19 pm/°C or 11.4 nW/°C for ZnO thickness of 200 nm and 100 nm, respectively.
Fichier principal
Vignette du fichier
Sensors, 2021, 21, 4982.pdf (2.93 Mo) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte

Dates et versions

hal-03857189 , version 1 (17-11-2022)

Identifiants

Citer

Paulina Listewnik, Mikhael Bechelany, Paweł Wierzba, Małgorzata Szczerska. Optical-Fiber Microsphere-Based Temperature Sensors with ZnO ALD Coating—Comparative Study. Sensors, 2021, 21 (15), pp.4982. ⟨10.3390/s21154982⟩. ⟨hal-03857189⟩
3 Consultations
9 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More